How much money have you spent on purchasing a phone stand? It’s unnecessarily expensive while you can use 3D printing. If phone and laptop are things that are not separated from you then these 3D printed phone stands and laptop stands must be useful to you. Let’s see the list we gathered below to check what the models are easiest to print and we add some headphone stands as well in case your valuable headphones need to be hung on.
Easily to start something with 3D printing, you can choose this simplest 3D printed phone stand model to try. Designed to handle phones or (small) tablets in landscape or portrait mode. Can be charged in portrait mode; there should be adequate space below the phone for the wire to curve around. If required, a hole at the rear can be used to pass cable through. Should be tall enough to allow you to touch the phone screen in portrait mode without falling over backwards. There are four little indents on the bottom for placing silicone or anything to keep it from slipping about on a table.
Source: Thingiverse
It's a 3D printed phone stand with a folding design that makes it a highly useful accessory. This is a fantastic tiny foldable phone stand that is ideal for aircraft flights and other similar situations. The design is based on a complicated print-in-place hinge. The three sections of the stand independently rotate through separate ranges of motion, 180' for the first and 110' for the second. In a hurry, it could be scaled up for tablets.
It is printed in 0.20mm layers, 0.4mm nozzle, 20% infill, 3 walls, no supports, and no brim.
Source: Cults
Is it a good thing when you can let your phone and Apple watch control in your sight? You will not ever get stuck in a forgetting habit of yours. This is a charging station that is 3D printed for both the iPhone and the Apple Watch. As the creator said it would be easier when you position the phone's side contacting the build plate, it prints with less support material.
For the most part, the print was done with 25% infill and 2 walls. For the part between the phone and the watch, the maker printed at 50% infill and 4 walls for increased strength and less possibility of the print splitting when the supports were removed.
Source: Grevtech
This amazing print was created not only to help you manage your workspace, but it’s also a 3D printed phone stand for keeping your phone up close.This 3D printed desktop organizer is a lovely piece that gives anyone who has too many objects in their workplace a sense of organization. The organizer has several storage options, including a phone dock, pen supports, a sticky note surface, and a carrier for USB sticks and other similar devices.
You want to keep your phone-stand as simple but it has to be impressive? You should try your hands in this stand right now. The phone holder is a simple yet sturdy holder that will not take up too much room on your workstation. This holder was designed to provide you ample access if you want to use your phone while it is resting on the holder. Besides that, this stand looks funny enough to stand out of anywhere you put it. You will have amazing decorations for yourself.
This 3D printed phone stand is a mounting solution for tiny things like phones and cameras. It is meant to be modular so that it may be used in a variety of ways. Most phones and tiny cameras may be mounted to a variety of things using the technique. The main technique is to use the same printed parts for multiple purposes. The accompanying phone clamp has a strong grip on phones. It is also appropriate for phones ranging in width from 55mm to 85mm. The clamp hook was slanted such that it would not be able to reach and mistakenly hit the phone's side buttons. It is strongly advised to print the pieces in this project with a complete support interface. The support interface would provide a flat bottom, resulting in improved mechanical performance. During my testing, the maker advised that you should try printing in the present orientation. It is not advised to reposition the arms in order to preserve support material. If the tabs are not written correctly, they will be easily broken.
To have knobs on the same side, mirror the arm one after the other. The bolts cannot be printed vertically in order to be robust enough to withstand pulling force. As a result, the bolts are horizontally orientated, with the bottom teeth shaved out and a 30 degree step form (it is usually 45 if printed vertically). The bolts are both sturdy and simple to print with support material, even at 0.2mm layer height, thanks to this treatment. To improve accuracy, print bolts and nuts at a modest outer wall speed (15mm/s). If the bolts and nuts tolerance doesn't work for you, try changing the XY compensation parameter in slicer to acquire a bigger tolerance.
It is not advisable to extend the arm too far. At this scale, general filament is not strong enough to withstand so much lateral force, and the arm would be highly unstable. And the arms are designed to be stationary. As the maker gave warning, If you want to utilize this design as a selfie stick or something similar, please be mindful of the material strength and do so at your own risk.
Source: Ryan Huang
This shelf may be used to store your phone or tablet next to the power socket so that you can view it upright. It may be hung on the wall and prevents the phone from hanging and dropping. You may also use it as a storage box for your phone, remote, pen, or whatever else you choose.
How about integrating keychain with phone-stand? We’re sure this is a good idea for everyone, so that you may want to add the 3D printed phone stand model on your list. A lovely 3D phone support that can be printed in the shape of several animals or any characters you like. It can assist you keep your keys close to hand at all times and also serves as a phone stand.
Warning by the maker: Only use flexible filament to print the hook for the headset plug; hard filaments may break and remain inside the smartphone.
This iPhone amp prints for free and is an excellent desktop decoration. It has the same aesthetic appeal as a gramophone and will boost the depth and volume of music played from your phone. Why not give it a creative paint job to make it stand out more? Ideal for use at home or in the office.
Source: Lee Smith
Friends and relatives will believe you bought it at an electronics store since it is so sleek and attractive! MakerBot built it to fit exactly into the Replicator+ build volume. Hundreds of people have submitted Makes, indicating that it is simple to print. Support isn't required, and it should be a straightforward print using conventional polymers like PLA.
Source: MakerBot
Because it clips onto a shelf or desk, this 3D printed headphone stand is ideal for reducing clutter. This would also be a fantastic method for audio equipment dealers to exhibit demonstration models on the same shelf as the retail inventory. This model necessitates the use of supports as well as some post-processing. The designer suggests an infill of 10-30% and a resolution of.15 mm. In terms of material, they advocate PLA over ABS owing to warping concerns with the latter.
Source: Borchei
This stand has a few interesting characteristics. First and foremost, it illuminates! Second, it may function as a low-power light source. Finally, it was designed to be assembled without the need of adhesive. Despite its opulence, this model should be simple to print. Because there is no ventilation in the design, the designer recommends using low-power LEDs.
It's so compact that it'll fit effortlessly into your pocket or purse. To conserve space, the design contains a hinge-like mechanism that allows it to be folded back on itself. During prolonged gaming sessions, you may leave a huge flow of air under your computer. Allows the keyboard to be gently slanted for maximum comfort. You may need to print two of these devices for convenience: one for each side of the laptop. The designer recommends printing at 0.1-mm resolution with 30% infill. This print does not require any assistance.
Many individuals spend a lot of time changing their computer's viewing angle to get the optimal one in order to see the colors more clearly or just to have a better view. The battle is ended thanks to this adjustable laptop stand: Angles may be set in one of 12 different ways. Using a ratchet mechanism, the user may alter the angle and position of their laptop. Furthermore, no ports are obstructed, allowing you to plug in all of your connections as usual.
This model is composed of four separate parts. This model should have a 15% infill and a 0.3-mm resolution, according to the creator. Printing the complicated pieces should be simple as long as the print speed is kept low.
Source: 3DdesignBros
When not in use, this amazing stand lets you show off your game-winning controller and headset. Your tools are too valuable to be left lying around. This stand offers you the room you need. Display your gaming hardware in a creative way while keeping your desk neat. The layout will accommodate both the regular and elite controllers.
This stand is low-profile while also aiding in the organization of your desk/gaming environment. Because of its universal design, it may be used with your Xbox Series X/S controller, Xbox One controller, PS5 controller, Switch Pro controller, or any other type of controller and headset brand.
3D printed phone stands and laptop stands or even headphone stands help you keep your desktop neatly and tidy. It provides you with more space and keeps the sight of your stuff when you put them somewhere. If you are working with this technology all the time, you surely need these things more than you ever think!
See more: 2022 IS MORE ENJOYABLE WITH A LIST OF COOL 3D PRINTS YOU CAN EASILY MAKE