For Marvel fans, the Marvel Universe has featured many impressive characters. These characters possess their unique superpowers that help them to create eye-catching movie scenes. You can recreate these scenes by arranging models of these prominent characters. The article will introduce the top 9 most impressive 3D printed statues of Marvel's characters. In addition, there are some STL reference files for you to modify and redesign according to your needs.
Red Hulk is the alias of the general Thaddeus E.Ross. This is a villain appearing in the Marvel comics. Ross was an officer serving in the United States Army. He is the father-in-law of Dr. Bruce Banner, and the one who turned Banner into the notorious Hulk.
Red Hulk has far superior strength compared to Green Hulk. Red Hulk's appearance is similar to Hulk's, except that he is red. Although the appearance is not much different, the strength of Red Hulk is much greater than that of Hulk. In singles matches, Red Hulk is usually the winner. However, Red Hulk still can be defeated by members of the Avengers.
Sascha Wesler released an impressive 3D printed statues design of Red Hulk. This design simulates the scene of Red Hulk's attack quite sophisticatedly and genuinely. You can find online his high quality STL blueprints for 3D printing.
If you are a fan of the Marvel series, you will not be able to forget the character of Thanos. This is one of the strongest villains in the Marvel universe. Thanos also has incredible physical strength in both speed and muscle. Besides, Thanos has all the other powers to overwhelm the Avengers. In addition, he also showed his bravery through the strategy of defeating the Avengers.
Thanos has appeared several times in the Avengers franchise. However, the strength and appeal of this character is best demonstrated only through the movie Avengers: Infinity War (2018). In this movie, Thanos with the infinity gauntlet can destroy half the world with the snap of his fingers. It is this power of Thanos that has created a fever on social networks. Many people have designed 3D prints of this character and the infinity gauntlet.
The Thanos print is sure to become the highlight of the Marvel universe collection. Below is a design of Je Kwon Im simulating the scene where Thanos is celebrating his victory over the Avengers. You can find his Marvel STL file to make out the Thanos 3D printed statues.
Besides that, you can use Salvatore Bartolomeo's Marvel STL file to print a bust of Thanos. This design clearly shows the contours of his face. This will be a great choice to put together with other Avengers’ Age of Ultron 3D statues.
Venom is an alien creature that parasitizes Eddie Brock. Brock is a journalist and rival of Parker - Spiderman. Brock always wanted to defeat Parker, so he accepted to let venom parasitize to gain extraordinary strength.
Venom has appeared in many different movies. For sometimes, he is the righteous character or the villain. Thus, this role can leave a deep impression on viewers because of the incredible strength and psychological factor of the character.
You can look for the 3D printed statues design of this character by Piper Michel. This design simulates Venom standing on an iron bar and full of electric rays. After downloading the Venom STL file, you can edit a few details to fit your collection.
Riot is a powerful character in the Marvel universe. Riot has a very similar appearance to Venom. But, he is a righteous character, always ready to fight the bad guys, especially Venom.
According to the plot, Riot was created from Venom's genes. Therefore, he possesses the same abilities as Venom. In addition, Riot also has the same sound and fear of Knull as Venom. Therefore, the outcome for the battle of these two characters is very difficult to decide.
Below is a Riot design made by Joffrey Mansuy. In this pose, Riot transforms one hand into a blade for combat. You can put Venom and Riot prints side by side to create a combatting set specialized for these two characters.
Loki has been a character that is no stranger to Marvel fans. He ranks as the 4th greatest comic book villain in the world. Loki is the enemy of the Avengers, especially Thor. This character appears in many of Thor's films and comics. In addition, the name Loki also appeared in other films such as "lightning thief".
Sometimes Loki is the main character. He will appear and help the characters of the X-Men, Avengers, and other movies. This character possesses powerful as well as interesting superpowers: telepathy, creating hallucinations.
Loki is known as the god of deception. In many movies, this character has shown his sly personality. Loki is one of the most charismatic villains in the Marvel universe. He presents himself as a man full of ingenuity, ambition, and calculation.
This will be a great choice to add to your collection of Marvel characters. In particular, when decorating, you can place this character next to Thor to increase the attractiveness.
Below is a reference to the 3D printed statues design of the Loki Marvel Character model. This is a print of Loki's portrait. His lines exude full of intelligence and ambition. Besides, you can find other vertical prints from the internet.
If you are following the X-Men universe, you will see Magneto a lot and he is one of the key characters for the series. Magneto often appears as the anti-hero villain. However, in some cases, a consciousness Magneto helps the heroes to fight against other powerful forces that want to destroy the earth.
This is a character with diverse emotional psychology. Unlike other villains, he opposes superheroes who are not purely for the sake of themselves as well as to want his own X-men community to have a comfortable life, not dependent on the society of humans.
You can refer to Magneto's 3D printed statues below to decorate your collection of X-men characters. This Avengers age of ultron 3D statue reimagines the character's idiosyncrasies when starting to use superpowers.
Hela is the villain and one of Thor's main enemies. This character first appeared in the movie Thor: Ragnarok. She is a goddess of death pacted with many supernatural powers.
Hela is Loki's child, so she also possesses his tactical prowess. Hela is physically superior with superhuman strength, speed, stamina, and endurance on levels far surpassing many other races. In particular, she has a strong resistance to magic. So, Hela's strength is enough to stand against Thor and other Avenger heroes.
Hela is an anti-heroine with a hot, dynamic and beautiful body. The word "Hela" is an immortal cell line used in scientific research. Therefore, her hair is designed based on the image of this cell type.
Below is the exquisitely designed 3D printed character model. This is a print version of the STL file by designer David Emanuel. You can find other prints online for a variety of poses to match your collection.
Modok is a villain in the Marvel universe. This is a character with a unique and different shape in Marvel's villains.
He did a lot of research and experimentation. As a result, he was genetically modified to become a monster with an oversized head. His head can hold huge amounts of information and is comparable to a supercomputer. He has the ability to control minds and read minds.
Also Modok can calculate exactly what other people will do. However, because the brain grows too strong, his other parts are atrophied. In every movie scene, we can see him sitting on a special chair that has the ability to fly and comes with a weapon.
Below is a sample of a 3D printed statue made by Wizaroelementaro. In this design, Modok is sitting on a flying chair and below are mutated brains.
Norman Osborn is the main antagonist in the Spider-Man franchise. Norman Osborn was the notorious CEO of a corporation. After he was exposed to the chemical Goblin Serum, he transformed into a monster. When he was transformed, his mind was gradually replaced by another thought and he eventually became a Green Goblin. The Green Goblin is obsessed with killing Spider-Man.
Osborn's son Harry was also transformed into the same creature after Osborn's death. Next is Dr. Bart Hamilton who also transforms himself into a Green Goblin monster. The name Green Goblin is a nickname given to those who were transformed into monster form by the Goblin Serum.
Below is one of the most impressive designs on the market provided by cgtrader. You can refer to or choose to download the Marvel STL File to edit and add to your 3D printed statues collection.
Above are the top 9 best 3D printed statues for you to choose for your collection. These characters are all prominent members of the Marvel universe. You can edit the STL files to fit your wishes and styles. In addition, you can combine different characters with miniatures to create their unique battle scenes. Let’s choose your favorite characters and download the files to print and decorate your collection.
See more: MAKE YOUR COLLECTION AWESOME IN NEW YEAR - 15 BEST 3D PRINTS YOU HAVE TO PRINT OUT.