Many items may be made using 3D printing, and one thing people have found 3D printing to be particularly beneficial is cosplay. Many costumes require a unique sword to complete the appearance, and once again, 3D printing comes to the picture.
Our epic 3D printed sword list from the movie, the video game will make the best cosplay items for you. Let’s check it out!
Katanas, with their sleek body, sharp blade, and a long grip, are among the coolest swords. The katana is made up of 10 printed sections, as well as some hardware, like M3 screws and threaded rods for firmly connecting the pieces. Part-to-part strength is provided by the threaded rods, and the designer recommends using glue to further secure the blade's structural integrity. They also recommend sanding the components to make them smooth, filling up any defects with epoxy glue or repairing putty, then spray painting the pieces.
Master Sword, also known as the Legendary Sword, Blade of Evil's Bane, and other titles is one of the most treasured weapons in the Zelda game world. The sword in the game is enormous and hefty. This replica, at over 1.2 meters (about 47 1/4 inches) in length, doesn't shy away from the immensity of its inspiration.
The Master Sword 3D print is split into 11 3D printed components that link using built-in dowel joints to make the weapon more printable. The object was printed using a 0.2-mm layer height and a 10% infill density, using around 560 grams of filament. Some manufacturers said that the sword needs to separate several parts and then glue them together after printing.
The Triton Sword is a sword based on the Pirates of the Caribbean series. It is Blackbeard's favorite weapon, and it is supposed to have mystical abilities.
Before being combined using epoxy or superglue, the sword is printed in numerous sections. The blade is supported by a metal rod on the interior. The metal rod measures 36 inches in length and has a diameter of 3/16 inches. You may scale the sword up a few percent and use a 5mm diameter rod instead if you're using the metric system.
You're undoubtedly acquainted with the Energy Sword, the close-combat weapon of select Covenant Empire extraterrestrial troops if you've ever played any of the Halo video games. The sword is intended to employ light energy to destroy the opponents of its wielder, and this 3D printed version uses LEDs to imitate this capability.
The Ruiz Brothers at Adafruit built this device, which is powered by NeoPixel LEDs, a battery, and a few other circuit boards. The creators propose printing the pieces at a speed of 50 mm/s and activating supports for the front and rear handles in their instructions. One manufacturer also specified a layer height of 0.18 to 0.25 mm and a 30% infill density for their print settings.
Kylo Ren's lightsaber, which was first shown in Star Wars: The Force Awakens, is one of the greatest lightsabers to date. The lightsaber is the weapon of choice for both Jedi and Sith soldiers in the Star Wars universe. It's made up of a plasma sword fueled by a Kyber Crystal, and using it takes a lot of expertise and training.
To make a lightsaber, the original movie props mixed old camera flashes with pistol components, sink knobs, suppressors, and other odd stuff. Those parts, unfortunately, are no longer as readily available as they once were. People have attempted to make their copies using PVC pipes and plumbing, but the results have never been satisfactory.
This is where 3D printing enters the picture: You can make practically any model with excellent accuracy and minimal cost with a 3D printed lightsaber.
This Buster Sword was designed and cut particularly for the 3D printed sword to fulfill your FF7 Cloud Strife wishes.
The Buster Sword debuted in Final Fantasy VII and has since appeared in various subsequent games in the series. Cloud Strife's signature weapon, was formerly used by Zack Fair and Angeal Hewley. Because of its huge size, the Buster Sword has become an iconic image for Cloud and Final Fantasy VII, and he wields it in the majority of his appearances.
The Buster Sword is a very broad sword with a wide blade. It's around five to six feet long from tip to handle, with a single-edged broad blade about one foot wide. The blade has a brighter hue on the bladed edge, while the remainder of the blade is dark grey, and the handguard looks to be bolted or riveted into place in Cloud's Final Fantasy VII artwork. Two holes near the handguard are claimed to represent Materia slots or where Cloud hooks the sword onto his back, depending on who you ask. In most of the Buster Sword's spin-off appearances, this design is used. Cloud wields a Buster Sword with this design wrapped in bandages in the Kingdom Hearts series.
If you want to cosplay Cloud Strife on Halloween or at a festival, then surely you do not want to be without Buster Sword.
The regular lightsabers from the Star Wars story are certainly familiar to you, but the mythical Darksaber is a considerably rarer weapon. You may have seen this sword in Season 2 of The Mandalorian, but it's also featured in the animated series Star Wars: The Clone Wars.
This Darksaber Sword 3D model, like one of the earlier models, is foldable and features exquisite detail that adds to the sword's fantastic appearance. The model was printed with a layer height of 0.2 to 0.3 mm and a 20 percent infill density. Also, for the hilt end component, utilize supports (albeit they shouldn't be required for the others).
At the start of Chapter II, Geralt is given the task of fighting The Beast of the Sewers. One of the witcher's two main weapons is a silver sword. It's a delicate sword that's only useful against silver-sensitive creatures like the undead and most monsters. It's light enough to be used with only one hand, freeing up the other for another weapon or casting Signs.
The witcher's silver sword is made of steel with a thick covering of silver on top that is fatal to magical monsters. This weapon was created specifically for slaying magical monsters that can't be hurt with ordinary steel weapons.
The 3D printed sword has been cut to suit most 3d printers while requiring the least amount of support. This sword also has a hole (for a 5mm rod) running through it to aid alignment and provide strength. The steel sword's pendant may be done separately.
The Sword of Omens from the series ThunderCats comes next, and the model is a remix of the sword's dagger version. A well-designed extended grip, as well as cross- and rain-guards, are included in this multi-part model. This model has been revised several times to enhance its appearance and printability.
The designer didn't include any printing advice to assist you with adjusting your slicer settings, however, there are a few Makes that do. One creator stated that they utilized a 25% infill density and no supports in their amazing PLA print of the sword.
While there have been various variants of this sword over the years, owning an old fashion sword is a great idea.
Meridia is a Daedric Prince who is connected with life and vitality. With the Sunburst as her sign, it's only natural that she's also known as the Lady of Infinite Energies. Despite her Daedric Prince title, she is not wholly wicked and has a kind aura. This is especially true of her Daedric artifact, Dawnbreaker, which can be obtained after completing "The Break of Dawn" quest.
Dawnbreaker seems to be an artifact at first look. The blade features a circular cross guard with a jewel in the center that emanates light at all times. The light brightens gloomy places, which isn't only an aesthetic impact. It possesses 10 Weight and 12 Damage, making it as light as a Steel Sword yet as powerful as a Glass Sword in terms of numbers.
The sword has been divided into sections so that it may be printed in full size, depending on your printer.
Have you ever considered turning a video game item into the coolest, largest-scale 3D printed sword ever? So, what's this? Someone did it. The 3D printed sword Frostmourne from World of Warcraft reaches 1.3 meters tall.
Frostmourne was the runeblade that belonged to the Lich King in World of Warcraft, and this is a replica of it. The sword was printed using a conventional 0.2-mm layer height and a 10% infill density, according to the designer, to save filament for such a large job. Another community maker shared a fantastic PLA design with the information that they utilized two shells.
Narsil is the shattered sword that Isildur used to cut the ring from Sauron's grasp in The Lord of the Rings. The entire length of these Narsil Swords is 52 7/8 inches. They contain Sindarin writing on a 40 5/8th inch, unsharpened 420 stainless steel blade. The handle is made of genuine leather. The fittings are plated in 24kt gold. The crossguard and pommel of the Narsil Swords are made of antique silver-colored solid metal. These legally licensed pieces are made by United Cutlery and come with a certificate of authenticity. A wooden wall display plaque, mounting hardware, and display instructions are included.
The sword 3D model is rather large and intended for post-processing. The download includes files that are not sliced into tiny parts and sections of the sword that are ready to be 3D printed on a 200 mm print bed. To save you time, all cut parts are placed on the print bed exactly as we would print them.
CONCLUSION
These 3D printed video game sword props are for amusement, cosplay, and collecting reasons only, and should not be considered genuine weapons, regardless of whatever 3D design you select to print. Use 3D printed sword carefully and have fun making it.
After learning about 3D Printed Sword, let's find out immediately about 3D Printed Knife with extremely diverse print models.