Halloween is coming! Halloween is all about scaring people, haunted houses, carving pumpkins, trick-or-treating, and parties! It’s also a suitable time for Halloween 3D prints, which is an ideal way to make costumes, props, pumpkins, and much more. We’ve gathered the most interesting and spooky 3D printing ideas for decorations and accessories in this article.
Makies is the designer for this Halloween 3D prints. This model is highly popular because it has 219 Makes and 19 Remixes shared.
This classic jack-o’-lantern design is a pretty popular model with hundreds of Makes. This 3d printed Halloween has two parts: the pumpkin and the lid. The top opening of the pumpkin has a 24-mm diameter, so you can fit an electronic candle or a LED light inside. For the best quality results, you should print with a 0.2-mm layer height and 10% infill.
Hjelmfelt is the designer for this Halloween 3D prints. This 3d print idea is highly popular because it has 93 Makes and 22 Remixes.
Halloween print has a base and a stem as well as different faces that snap to the base. The designer provides 12 different face models and there are several more that were designed by the community and posted as Remixes, including Jack Skellington and Oogie Boogie.
With one base, you can swap out the face for a different theme. You should print the model with only two shells because the lantern glows better this way with a light inside.
BirdBottis the designer for this amazing 3D. This model has been downloaded over 620 times, and 3 makers have shared amazing Halloween 3D prints.
This design makes us remember about The Nightmare Before Christmas. This Halloween 3D print can be printed either as one piece or two. You’ll need support for printing the eyes and teeth. It can hold a LED light or electronic candle inside.
PolyForge is the designer for this amazing 3D. 53 people have shared their own Makes of this 3D Halloween.
The Cheshire Cat is a recognizable character from Alice’s Adventures in Wonderland, even about the book or the movies. This Halloween 3D print is sure to give people a scare when it is in the dark. Printing-wise, you should use a 0.3-mm layer height as well as a 15% infill. You will also need to use supports.
TobyCWood is the designer for this amazing 3D. This 3D print Halloween is based on a scan of an actual pumpkin so that the texture looks so realistic. With a handle added on its side, you can attach the pumpkin-shaped scoop to a broomstick, a selfie stick, or anything you’ve got.
The model’s design will make trick-or-treating safer, because you’ll be able to keep a good distance from other people, making the overall experience more comfortable for everyone involved. This 3d printing idea is one of the most amazing halloween 3d prints.
How popular is it? One has shared a successful-looking Make, and you won’t need support to replicate it.
TeamOlivia is the designer for this amazing 3D. These spooky cookie cutters have 3 ways to make.
Halloween is a good time to feed your sweet tooth. Are you thinking about what you’re going to bring to this year’s Halloween parties? These Halloween 3d prints will give your snacks extra flair. These amazing 3d have four shapes: one pumpkin and three ghosts. The designer printed the models in PETG, which is a food-safe filament. Although the resulting cookies will look good, we can’t vouch for how they’ll taste, so you should follow a good recipe!
Muzz64 is the designer for this amazing 3D. This model is highly popular because it has 23 Makes.
This 3 d printing idea helps you evenly distribute candy with this pumpkin if you don’t want to spend the whole night giving out candy. This model is the solution for you to have more time and enjoy some scary movies. This 3d printed Halloween includes a hollowed-out cylinder (the stem) with a hole on its side. You have to fill the pumpkin through the stem at the top, rotate the stem to make the pumpkin open, and the candy will come out!
One important detail for you, when printing this model is to avoid using automated supports. You should follow the instructions given by the designer on where and how to place supports.
Steven Quinn is the designer for this amazing 3D. This model is highly popular because it has over 30 downloads.
The original creator of these halloween 3d prints used wood PLA to make them look as if they were carved out of wood, but you can use any type of filament you have. There are four designs available, all “carved” into a pumpkin-shaped coaster.
You should hold 65% infill on the weight of glasses to not bend. Print as many as you need for your home.
rayjizza is the designer for this amazing 3D. This model is highly popular because it has over 730 downloads, and 11 makes have been shared.
Those Halloween 3d prints add extra spook to the night. You don’t need to be afraid of the dark, not even on Halloween. With this cute 3d printing idea, you can keep some light on even when everything else is dark. You need 17 ultra-white LEDs. The color of the light will depend on the color of PLA used and you should play around to find the best combination!
Steven Quinn is the designer for this amazing 3D. This model is highly popular because it has over 60 downloads.
An Addams Family is a funny 3d print idea for Halloween. Although these 3D printing ideas can be a bit tricky to print, the results look like a real human hand. It’s also able to stand on its fingers or by the wrist. If standing on its wrist, this model can be used to hold objects. Or, if it’s standing on the fingers, it has a candle holder on the other side. When printing this halloween 3d, you need some support and the designer also recommends using a raft.
Clockspring is the designer for this amazing 3D. This model is highly popular because it has over 2,740 downloads and 9 community prints and all of the users look scarily good.
You can use your plants in order to add to a scary ambiance! You can 3D print a skull planter to make the plants part of your decoration! If you’ve got the right type of plant, they will look like brains.
Make sure to use a filament that’s water-resistant and a food-safe filament so that the damp dirt doesn’t damage the plant and the plastic of the filament doesn’t contaminate the earth. Printing-wise, the author of this halloween 3d prints recommends using supports in the eyes and nose.
Yeg3d is the designer for this amazing 3D. This model has 59 successful makes that have been shared so far.
This Frankenstein’s Monster’s head is so useful. You can use it to store candy, scare children, or pot a plant. You could also opt to keep the brains in, try to bring it to life, and maybe on a stormy night.
Although the model is closed on the bottom, the designer suggests cutting that off in the slicer to stand better. When you print it, you’ll need support to correctly capture all the details of this halloween 3d prints.
Adafruit is the designer for this amazing 3D. This model has over 260 downloads.
"Double, double, toil and trouble; Fire burn and cauldron bubble". Because it was developed by Adafruit, this cauldron has some electronic components to make it more interesting. This halloween 3d prints has different colored LED lights that are stored in a compartment located at the bottom of the cauldron. You should read carefully the instructions for the wiring are linked in the model’s description.
X3RPM is the designer for this amazing 3D. This model is highly popular because it has over 530 downloads, and 2 users have shared their own prints.
"The undead are ready to leave their graves". Complete with a mini jack-o’-lantern, this realistic-looking grave can be printed without any support. You need a bit of glue to assemble its parts, and you can also put LED lights inside the coffin and make it light up. It could be a great decoration for your garden! According to the designer, you don’t need support to print this print idea
F0R63 is the designer for this amazing 3D. This model is highly popular because There are 39 prints shared by the community.
If you went into a room with all the lights off and felt this on the wall or table, it could make you scared! Halloween 3d prints are four different hand designs. When affixed to a surface, they appear as if they’re coming out of it. The designer advises you should use 0% infill so it’s lighter and easier to hang on the wall.
Above are 15 interesting Halloween 3d prints for you to choose from to decorate in the upcoming Halloween. If you want to make your house scarier, do not forget these 3D prints. Make sure your guests will be very scared and never forget that night.
Do you feel like your house is scary enough? If not enough, join us to make it even scarier with TOP 14 scariest 3D printed alien models in science fiction movies.