Star Wars Binder Cuffs: Best things you should not miss

Star Wars Binder Cuffs: Best things you should not miss

Published May 10th, 2022 02:52

Your Star Wars collection is missing something! It will not be complete without these fascinating 3d Printed models: AT-ST, Cycler Rifle and Star Wars Binder cuffs.

Star Wars has become one of the most well-known instances of the space opera subgenre of science fiction, as well as one of the most successful film franchises of all time. Are you a Star Wars die-hard fan just like I am, then you should not miss these little but absorbing Star Wars 3d Printed Models: At-St Walker, DLT19, Cycler Rifle and…something sensual like Star Wars Binder cuffs.

I. 3d Printed Star Wars Binder Cuffs

"You can play with these... All the way to the detention center."

―Mace Windu, to Gorgol

Stun cuffs, sometimes known as cuffs or just binders, were durasteel devices meant to restrict a captive's limb movement. Cuffs were usually employed to bind a prisoner's hands, but they may also be used to bind both feet, one arm and one leg, or one limb to a fixed object to further immobilize a captive.

star-wars-binder-cuffs

1. Star Wars Binder Cuffs 3d design is ready!

With this Star Wars Binder Cuffs 3d print design, you can re-create the most impressive device that could lock in every human being character ever exist - regardless of their power.

Having this 3d printed Star Wars Binder cuffs in my collections sometimes confuses my partner about my fetish, I mean she was right but this thing is far beyond my sensual fantasy - this is my passion!

star-wars-binder-cuffs

2. Funny Story about Imperial Star Wars Binder cuffs

One interesting story about this Imperial Star Wars Binder cuffs just only get noticed rewatching Star Wars: The Empire Strikes Back - SLEIGHT OF HAND BY HAN SOLO

“Han Solo is in Imperial star wars binder cuffs as he is brought to the freezing chamber to be frozen into carbonite for bounty hunter Boba Fett's commission. This is routine protocol for all Imperial escortees, especially dangerous and unpredictable criminals such as Han Solo.

There's been a lot of speculation about whether or not he escaped from the binder cuffs before being lowered into the freezing chamber to begin the process of carbon stasis, but it's the Ugnaughts that do it. The carbonite bindings on his upper arms keep him firmly in place, so when the enormous slab of carbonite rises from the chamber, his hands are up about his lips, frozen in a distressed look.”

star-wars-binder-cuffs

II. 3d Printed Star Wars ATST Walker

The All Territory Scout Transport (AT-ST), moreover known as a Scout Transport, Scout Walker, or contemptuously as a chicken walker, was a lightweight, bipedal walker utilized by the ground forces of the Galactic Empire. Afterward, the Primary Arrange utilized an upgraded variation of the AT-ST inside their military.

star wars binder cuffs

1. 3D Printing for ATST Walker

star-wars-binder-cuffs

AT-ST Walker is a static assembly model for 3D printing that has already been updated and adapted for various types of 3D printers. Furthermore, the model's degree of detail and accuracy were greatly improved when it was updated. Thus, the Walker model has been divided into many assembly parts, such as its fence-cutting blades, joint shields, radiator, plastron shields, gyro system, twin blaster cannons, command viewport, concussion launcher, light blaster cannon, entry hatch, handrail, and so on, in order to provide the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support.

2. Variant models of ATST Walker

Star Wars is the galaxy of thousands of wildest sci-fi fantasy, and of course - Variant models of AT-ST

1.    ATST Mark III

The AT-ST Mark IIIs were modified with experimental armor that was faster and more durable than the standard AT-ST. They excelled against most targets, equipped with twin powerful laser cannons and operated by experienced personnel.

2.    Enhanced ATST Walker

The upgraded AT-ST Walkers had better power couplings and sub-systems, allowing them to unleash high-powered blasts at a faster rate than normal. They wore dark armor plates as well.

3.    All Terrain Heavy Scout

During the cosmic First Order-Resistance War, the All Terrain Heavy Scout was a variant of the highly advanced First Order AT-ST, which saw action in the First Order Army.

See More: What's so special about the Star Wars 3D printed model?

III. 3d Printed Star Wars Cycler Rifle

1. 3d Printing Cycler Rifle

Inspired by The Mandalorian, we modeled and textured the cycler rifle, a weapon wielded by the Tusken Raiders of Tatooine. In ranged combat, the Tusken Raiders of Tatooine employed the Tusken Cycler as their primary projectile weapon. The cycler was an older rifle design that fell into the slugthrower class, firing solid projectiles encased in energy rather than blaster bolts. When fired, the weapon made a strange sound that sounded like a cross between a blaster and a musket.

star-wars-binder-cuffs

The Raiders had been spotted in the desert sniping at passing podracers. The cycler guns were powerful enough at long range to kill Teemto Pagalies' podracer, causing it to crash during the Boonta Eve Classic. The cycler rifle was a less popular weapon among Tusken tribes but since, despite the fact that it could strike targets reliably at long ranges, it had a primitive design and a slow fire rate. In the aftermath of his apparent death after combat at the Great Pit of Carkoon, Boba Fett possessed an antique cycler weapon.

2. Tusken Raiders and their infamous Cycler Rifle

"These people lay ancestral claim to the Dune Sea, and if you are to pass, a toll is to be paid to them."

―Boba Fett, on the Tusken Raiders

star-wars-binder-cuffs

Tusken Raiders, commonly known as Sand People or simply Tuskens, were a nomadic sentient civilization native to the desert planet Tatooine. They were frequently antagonistic to surrounding settlements. Tusken children were called Uli-ah. Tusken Raiders got their moniker from a period of coordinated attacks on the colony of Fort Tusken roughly eight centuries before 19 BBY.

Male Tusken Raiders were their clan's warriors, frequently attacking unwary visitors who happened to pass through their territory. They wielded gaderffii sticks in combat, and used cycler rifles to fire on vehicles they spotted. Every Tusken warrior fashioned his or her own gaderffii staff, making each one distinct. Males wore rough wrappings and clothes that protected them while still allowing them to move freely. Male Tuskens were warriors, while female Tuskens played a variety of roles. Females might be identified by their elaborate jeweled masks with eye openings and torso-covering sand-shrouds in some tribes. Tusken youngsters, known as Uli-ah, wore unisex cowls and plain cloaks and were not allowed to dress as males or females until they were adults.

IV. 3d Printed Star Wars DLT 19

1. 3D Printing DLT 19

One of the most favorite weapon of the Stormtroopers: DLT19 - definitely deserves a place in your Star Wars collection!
BlasTech Industries' heavy blaster rifle, the DLT-19, was a model of heavy blaster weapon. They were used by regular stormtroopers and Heavy Weapons Stormtroopers of the Galactic Empire, as well as by the bounty hunter Dengar, and some Heavy Soldiers of the Alliance to Restore the Republic. It was most typically utilized for holding down troops and killing large groups of enemies along with its fast rate of fire and ability to do heavy damage at great ranges.

2. Dengar - The bounty hunter and his signature DLT 19

Dengar, also known as Dengar the Demolisher, was a Corellian bounty hunter who operated during the Clone Wars' early stages. Dengar took part in a mission on Quarzite to secure property valuable to Lord Otua Blank of the planet Quarzite, during which he was a member of Krayt's Claw, a syndicate of hunters that included Boba Fett, Bossk, and Asajj Ventress. Dengar also fought against Maul and his Shadow Collective on Nal Hutta for customers such as the Grand Hutt Council.

star-wars-binder-cuffs

During his missions, Dengar wore plated battle armor and a turban to cover his head, a uniform that had become quite worn by the time he was summoned to Darth Vader's super star destroyer. During the safe cargo mission in the Clone Wars, he carried a DLT-18 laser gun. During the Galactic Civil War, his primary weapon was a DLT-19 heavy blaster rifle, which he augmented with the use of mini-grenades in close quarters combat. He also carried smoke grenades and a fire blade, which he used to cover his team's escape after a task for the Hutts went south.

V. Summary

Star Wars has a lot of positive aspects. Light sabers, to be precise. Droids for comic relief. Spaceships. The lightspeed jump is indicated by the clean blue lines. A badass princess with a sharp tongue (despite the fact that she is the only female character in the film, which I believe is one of its major weaknesses). A carpet that moves. An iconic terrible man who can be recognized not only by sight but also by sound. High stakes. Glory, guts, and scoundrels.

We can not bring back those sweet childhood memories but we could bring that far far away galaxy closer to us, and in this case, 3d Printed Star Wars Binder Cuffs.