Many items may be made with 3D printing, and one area where users have found 3D printing to be very beneficial is cosplay. Have you ever wanted to bring items like Dancers Blades or Black Clove Swords to make impression on the festival? Yes, there are many costumes that require a unique sword to complete the appearance, and once again, 3D printing comes to the rescue.
To help you choose easily what you want to make, we have listed 10 swords for you to pick out!
Even among paired weapons, this is a very rare set of curved swords. The Dancers Enchanted Swords, which use the heavily curved sword moveset of the Falchion, will deal physical damage as well as either Magic or Fire damage, depending on the blade that strikes. The scale of these weapons is likewise unusual. Leveling Strength and Dexterity will boost not just the physical damage of the swords, but also the Magic and Fire damage. Increasing Intelligence increases both Magic and Fire damage, but leveling Faith just increases Fire damage. This implies that the most efficient way to raise damage output on these weapons is with a quality build and that regardless of which stat is leveled, the Fire damage of the off-hand sword will be increased.
Due to its fundamental criteria and widely dispersed- Out scaling, the Dancers Enchanted Swords might be quite tough to create. Because they are paired with curved swords, they are unable to employ Hyper Armor in any fashion, even during weapon art, short of boosting with Perseverance or Iron Flesh. One advantageous aspect of its split elemental damage is that at least one of the blades would meet with poor flat defense against human opponents since resisting Fire and Magic damage would require increasing Strength and Intelligence, something few builds are capable of. The elemental damage also enables the paired strikes to do significant chip damage through most types of shields, since most PvP shields resist either Magic or Fire but not both.
The Alucard Sword is Alucard's family heirloom sword from his mother's side, as well as his primary weapon. The Alucard Shield, Alucard Mail, and probably the Alucard Spear are among the other relics. Alucard may use this sword to teleport behind an opponent and slash it in the back before returning to his original spot.
In the alternate timeline narrative Legends, Alucard held a weapon that may have been the Alucard Sword. He does not utilize a sword in Dracula's Curse, but he seems to bury it (along with a few other artifacts) alongside himself before falling into a profound slumber at the end of the game. He donned these things and invaded his father's fortress when he awoke during Symphony of the Night. Death demanded that he stop attacking. Death seized the family treasures and buried the sword in the Reverse Mine when he refused, but Alucard ultimately retrieved the weapon. He may have sealed this blade with his abilities when he locked his powers at the end of Symphony of the Night. If things ever got so bad that he had to battle in his actual form again, he'd have his cherished blade in hand. In Dawn of Sorrow's likely non-canonical Julius Mode, Alucard is obliged to do precisely that in order to oppose the new Dark Lord, Soma Cruz.
While the Alucard Sword is unique, there is another sword that resembles it, the Alucart Sword, which appears to be a duplicate of the original and lacks all of its powers.
Now, fans of Castlevania can have an Alucard Sword replica by 3D printing. You only need to download the file on the Internet and complete your custom.
Source: CollinsCreations
The Demon-Dweller Sword is a legendary anti-magic weapon. Asta discovers the sword in an underground treasury's hidden room.
The blade is summoned from an opened grimoire, where it is kept in the form of text. The user can summon the sword at any time without using any magical force.
The blade of the sword bears black patterns and is mainly coated in dirt. The sword also includes an intricate hilt with a four-sided guard, a spiral-patterned grip, and a sphere for the pommel. The sword's edges are capable of cutting magic and absorbing the magical force of others. When used to cut anything else, however, it is converted to a dull sword that inflicts harm on the opponent by physical trauma.
The sword's original power is to absorb spells and then discharge them in a flying slice. After absorbing a particular level of magical power, the black marks on the blade begin to glow with a hue matching the absorbed magical characteristic. When the user swings the sword at that point, it releases a soaring slash with qualities identical to the absorbed magical attribute. Another characteristic of the blade is the capacity to connect the holder to their friends. The possessor of this talent might draw magic power from their friends over a long distance or transfer magic and knowledge to their allies.
In Attack on Titian Weapons, Ultrahard steel is a substance used to create blades capable of penetrating and cutting Titan skin. The main weapon used in the battle against the Titans is a sword composed of ultrahard steel. These single-edged blades are part of the omnidirectional mobility gear, which is the sole known application for hardened steel. They are the only portable weapons that are powerful enough to pierce a Titan's body; cannons may hurt a Titan's body, but they are sluggish and imprecise. Firearms can damage the Titan's eyes, but they have a difficult time piercing the Titan's skin efficiently enough to kill it. As a result, knives are utilized two at a time to precisely cut the nape of the Titan's neck. They may also be used to sever or penetrate practically any other portion of a Titan's body, including tendons, fingers, and eyeballs. They are light enough that troops may carry numerous swords at once without feeling burdened down or hindered in their movements.
They do, however, have certain limits. After repeated use, the blades wear down and lose their sharp edge, which might lead to the blades breaking. Because a soldier must "amputate" the Titan's nape, a single blade is difficult to utilize before being caught or having another issue intervene, hence two blades are required to kill a Titan successfully and with less danger. If the blades are used against anything exceptionally hard, such as the Female Titan's toughened skin, they may break. As a result, troops wear many blades with their omnidirectional mobility gear so that they may simply replace them as necessary. Levi has thrown these blades at Titans from greater distances on occasion.
Farron Great Sword may be the second one you want after Dancers Enchanted Swords. In Dark Souls III, the Farron Great Sword is a soul-transposed hyper greatsword.The Farron Greatsword is a one-of-a-kind two-piece weapon designed for exceptional builds with a Dexterity bias. It is one of the lightest weapons in the hyper greatsword category, and its strikes cost a very little amount of stamina for its class. Its attacks deliver significant damage, making it a potent weapon in the proper hands.
Two-handing works similarly to Paired Weapons in that it equips the dagger in the off-hand, resulting in unusual attack combinations and allowing the wielder to parry with the dagger. The dagger combinations have tremendous stun-locking potential while also giving the wielder attacking momentum and large sweeping assaults. The inability to wield the weapon in both hands, on the other hand, is a critical drawback, as all attacks performed by this weapon, except the leaping attack, maybe parried, a disadvantage shared by no other hyper greatsword.
Source: Jacob N
The Sword of Darkness was a sword used by Tommy Oliver as the Evil Green Ranger when under Rita Repulsa's control. The sword once belonged to Zordon, but it was taken from him 10,000 years ago by Knasty Knight, who handed the sword to Rita as a prize after defeating Zordon's warriors in combat.
The Sword of Darkness returned when Rita chose to assemble the Mutant Rangers, and it was wielded by the Green Mutant Ranger in place of a copy Dragon Dagger against Tommy. It's never clear if this is the real Sword of Darkness or a knockoff. When fighting the Dragonzord, the Green Mutant Ranger was last seen wielding the Sword of Darkness before being destroyed, presumably along with the sword.
Source: fito_pin
Firelink Greatsword is a soul-transposed greatsword in Dark Soul 3.
The Firelink Greatsword, formerly held by the Soul of Cinder, is a formidable weapon with qualities that make it a powerful weapon in the right hands. It has quality scaling, rising in damage proportionally to Strength and Dexterity, and does a fixed amount of Fire damage with each hit. This makes it a valuable weapon for piercing a foe's shield and dealing heavy elemental damage without requiring a large investment in Intelligence or Faith. Its moveset includes horizontal and vertical swings, offering it strong coverage against many adversaries as well as the capacity to bring targeted single-target damage to bear.
Ember, what distinguishes the Firelink Greatsword is its expertise. This talent allows the wielder to increase the weapon's Fire damage while shooting a plume of flame, causing massive damage with an attack while supplementing the weapon for the following follow-through. When used correctly, it may demolish adversaries and provide the wielder a significant edge in battle.
The Demon Destroyer Sword is a legendary anti-magic weapon. The sword may be found in the Gravito Rock Zone's floating dungeon's center area.
The blade is summoned from an opened grimoire, where it is kept in the form of text. The user can summon the sword at any time without using any magical force. This sword, unlike the Demon-Slayer and Demon-Dweller Swords, has a distinctive blade end with a broad edge and what looks to be a clover sign at the top. It is mainly coated in the dirt when initially seen, but as Licht takes it up, the dirt slips off, revealing a sparkling blade. It reverts to its dirt-encrusted state after being incorporated by Asta's grimoire.
Zuko Swords a.k.a Dual broadswords (twin broadswords) are two metal blades that are specially meant to chop or slash and are to be regarded as separate sections of the same weapon. The swords may also be used as single-edged weapons and have been seen in both the Earth Kingdom and the Fire Nation.
Zuko Dual swords are moderately curved and single-edged, though they sometimes have a few inches of the leading rear edge sharpened as well; the moderate curvature allows them to be quite successful in thrusting. Hilts are canted, meaning they curve in the opposite direction as the blade, which helps to handle specific types of cuts and thrusts. Typically, a string is looped around the handle's wood. Hilts can also be perforated like the Jian, a straight-bladed sword, to accommodate lanyards. The twin broadswords also featured unique guards that allowed both blades to be stowed in a single scabbard.
Source: Cults
Crown Splitter is a legendary blade that Titans can equip. Glimmer may be generated by dismantling Crown-Splitter.
The Crown Splitter is a class-specific blade in Destiny 2 that is now in high demand. This weapon, which can only be held by Titans, may benefit from a mix of modifications and deals greater damage than The Lament Exotic Sword.
What are your favorite swords on our list? The Dancers Blades or Attack on Titan Sword? However, there are more inspiration swords from games and movies for your 3D printing purpose. We hope you enjoy the work and have a perfect item!
For the perfect 3D printed sword collection, 10+ EPIC 3D PRINTED SWORD MODELS is the content you should not ignore.